|
Ian Goozee in the Flooring and Fencing part of White
Dog construction, in Common Road Chandlers
Ford has contacted Dave Foote. They have quite a few offcuts of mahogany,
oak and other hardwoods, some of which are a reasonable size and at the
moment they are either thrown into a skip or burnt. If anyone would like
to contact him about obtaining offcuts for turning or joinery at a
nominal cost then please call 02380 253184.
TORMEK SuperGrind 2000 for sale – As new. 250 mm (10
inch) x 50 mm ( 2 inch) grinding wheel and 210 mm x 30 mm honing wheel.
Complete with spanners manuals and following attachments; WM-200 Pro
Angle Master, SVH-60 Straight edge jig, SVX-150 Scissor & portable
electric hand planer blades jig, SVD-110 Tool rest with torlock, SVA-170
Axe jig, PA-70 honing paste (1/2 tube). £175 ONO. Please contact Steve
Marlow on 01794 517751 or 07809 629657.
Brian Hannam has a Viceroy lathe for sale. He says
that these lathes are rarely available and highly desirable. Rather like
a shortbed Graduate but better. A wonderful solid heavy cast iron
machine. The machine in question has a 3 phase motor, which is exactly
what's needed to fit an electronic variable speed kit. He also has an
80mm diameter combined faceplate/screwchuck, threaded 11/2 inch x 6tpi
for Graduate etc for sale. For more info, contact Brian on 01256 811911
during workshop hours, or 01256 325621 at other times.
Harry Butler has a heavy-duty One-Way laser hollowing
jig for sale. It’s as-new and comes complete with chisels. £150 (Cost
£350 new). Contact Harry on 01730 890463 or email him on
harryb(at)treenet.co.uk (...replace (at) with @).
D Harker has an Axminster Perform CCBL Variable speed
Lathe for sale. 18 months old. Hardly used. £125. Contact him on 02380
613043.
Nick Bowden has a Lennartsfors S1200V copy lathe for
sale. Bought in about 1995. It’ll copy turn anything up to 1050mm long by
150mm diameter. All-welded construction it weighs-in at just over 200kg.
£350. For further details contact Nick on 01256 771132 or 07899 840057.
Barry Richardson has a Tyme Cub wood turning lathe for
sale. It has a supporting bench,
an angle poise light and a variety of hand tools included so it would be
ideal for someone who wishes to take up turning. £120 complete o.n.o. Contact Barry on
01962 862749.
Back by popular demand! Gerry Dixon has another lot of
Renaissance Wax Polish in 200ml tubs. £5 per tub. Contact Gerry at gerrydixon@btinternet.com
or 02380263949. Wax can be collected or brought to the next meeting.
John
Davis has a Vicmarc VL175 lathe complete with stand that he wants to sell
(VL175).
It's in excellent condition and he's just replaced the controller (which
has 11mths warranty) which cost him £425. John wants £1500 for it and
will include the outboard tool rest (£250 new and only used a few times)
F.O.C if it's sold before the end of March. I reckon the new price would
be close to £2500. If you're interested, give John a call on (01264)
811070 or drop him a line to johndavis@cheavley.demon.co.uk.
John
Portman (not a member) has some rosewood and other stock for sale due to
ill-health. He's been told by Exotic Hardwoods that the total value could
be close to £200 for the rosewood which might give you a guide as to how
much he'd like for it. He has the following rosewood...
1x 77 inch x 1.5 inch x 1.5 inch
3x 56
inch x 1.5 inch x 1.5 inch
4x 24
inch x 1.5 inch x 1.5 inch
2x 48 inch
x 4 inch x 3/4 inch
1 x 46
inch x 3 inch x 3/4 inch
2 x 38
inchx 4 inch x 3/4
2 x 44 x
5 x 1 inch
1 x 49 x
5 x 1 inch
1 x 50 x
5 x 3/4 inch
He also
has some small planks of 30 year old oak, some teak and some mahogany
bits also.
If you're
interested please contact John directly on 023 8025 4033
|
